Databases
StackOverflow2013
Postsdbo
PO
 

Note that there are some explanatory texts on larger screens.

plurals
  1. PO
    primarykey
    data
    text
    <p>First I'd check to verify it is listening on the IPs you expect it to be:</p> <pre><code>netstat -nlpt | grep 6379 </code></pre> <p>Depending on how you start/stop you may not have actually restarted the instance when you thought you had. The netstat will tell you if it is listening where you think it is. If not, restart it and be sure it restarts. If it restarts and still is not listening where you expect, check your config file just to be sure.</p> <p>After establishing it is listening where you expect it to, from a remote node which should have access try:</p> <pre><code>redis-cli -h REMOTE.HOST ping </code></pre> <p>You could also try that from the local host but use the IP you expect it to be listening on instead of a hostname or localhost. You should see it PONG in response in both cases. </p> <p>If not, your firewall(s) is/are blocking you. This would be either the local IPTables or possibly a firewall in between the nodes. You could add a logging statement to your IPtables configuration to log connections over 6379 to see what is happening. Also, trying he redis ping from local and non-local to the same IP should be illustrative. If it responds locally but not remotely, I'd lean toward an intervening firewall depending on the complexity of your on-node IP Tables rules.</p>
    singulars
    1. This table or related slice is empty.
    1. PORedis - Connect to Remote Server
      singulars
      1. PTQuestion
    1. PTAnswer
    1. USThe Real Bill
    1. USThe Real Bill
    plurals
    1. This table or related slice is empty.
    1. This table or related slice is empty.
    1. PORedis - Connect to Remote Server
      singulars
      1. PTQuestion
    1. This table or related slice is empty.
    1. VO
      singulars
      1. PO
      1. This table or related slice is empty.
      1. VTUpMod
    2. VO
      singulars
      1. PO
      1. This table or related slice is empty.
      1. VTAcceptedByOriginator
    3. VO
      singulars
      1. PO
      1. This table or related slice is empty.
      1. VTUpMod
    1. COSO, to be clear, you are downvoting an answer to the problem posted because you have a related (but clearly not identical) problem it doesn't address? Whilst I agree with posting your solution, downvoting a correct answer because your problem was different doesn't seem the proper thing to do. That said, your solution is not a good choice for the question because the OP has multiple IPs and may not want to listen on all of them, and the OP specifically referenced the bind section in the config file in the question. Thus your solution does not address the question asked.
      singulars
      1. PO
      1. USThe Real Bill
    2. COWell, I read the question again, and it didn't seem so obvious for me that OP did set the correct conf for this 'bind' line. Also, I'm not sure that any firewall is involved in his case. Anyway, I can remove my -1 if you think it's rude. I just found that your answer was totally off-topic, and that it would not very helpful for the majority of users coming here with a very common issue... (the bind default parameter)
      singulars
      1. PO
      1. USOrabîg
    3. COThe OP did say he commented out the local bind rule, which tells redis to bind to all the addresses on the system. I wouldn't call the -1 rude, just inappropriate. The OP specifically stated he had IPtables rules in place, thus it is clear there are firewall rules in place in the question asked. Given the stated presence of a firewall and the removal of the local bind in the config, your answer is not correct or relevant for the question asked.
      singulars
      1. PO
      1. USThe Real Bill
 

Querying!

 
Guidance
A row detail

Detail views are divided into sections. All the information in the data section comes from columns in the selected row. The other sections display data from other, related rows.

Related data can be related in a to-one or a to-many fashion. Captions of data related in a to-many fashion link to a list view showing a filtered view of the table.

Try moving around until you find a non-empty to-many entry and click on the label to get to one. You can move back to the root by clicking on the database name in the header.

SQuiL has stopped working due to an internal error.

If you are curious you may find further information in the browser console, which is accessible through the devtools (F12).

Reload