Databases
StackOverflow2013
Postsdbo
PO
 

Note that there are some explanatory texts on larger screens.

plurals
  1. PO
    primarykey
    data
    text
    <ol> <li><p>Making a decision on sample size and overlap is always a compromise between frequency accuracy and timeliness: the bigger the sample, the more FFT bins and hence absolute accuracy, but it takes longer. I'm guessing you want regular updates on the frequency you're detecting, and absolute accuracy is not <em>too</em> important: so a 256 sample FFT seems a pretty good choice. Having an overlap will give a higher resolution on the same data, but at the expense of processing: again, 50% seems fine.</p></li> <li><p>Applying a window will stop frequency artifacts appearing due to the abrupt start and finish of the sample (you are effectively applying a square window if you do nothing). A Hamming window is fairly standard as it gives a good compromise between having sharp signals and low side-lobes: some windows will reject the side-lobes better (multiples of the detected frequency) but the detected signal will be spread over more bins, and others the opposite. On a small sample size with the amount of noise you have on your signal, I don't think it really matters much: you might as well stick with a Hamming window.</p></li> <li><p>Exactly right: the power spectrum is the square-root of the sum of the squares of the complex values. Your assumption about the Nyquist frequency is true: your scale will go up to 16Hz. I assume you are using a real FFT algorithm, which is returning 128 complex values (an FFT will give 256 values back, but because you are giving it a real signal, half will be an exact mirror image of the other), so each bin is 16/128 Hz wide. It is also common to show the power spectrum on a log scale, but that's irrelevant if you're just peak detecting.</p></li> <li><p>The 8Hz spike really is there: my guess is that a phone in a pocket of a moving person is more than a 1st order system, so you are going to have other frequency components, but should be able to detect the primary. You <em>could</em> filter it out, but that's pointless if you are taking an FFT: just ignore those bins if you are sure they are erroneous.</p></li> </ol> <p>You seem to be getting on fine. The only suggestion I would make is to develop some longer time heuristics on the results: look at successive outputs and reject short-term detected signals. Look for a principal component and see if you can track it as it moves around. </p>
    singulars
    1. This table or related slice is empty.
    1. POSome signal processing /FFT questions
      singulars
      1. PTQuestion
    1. PTAnswer
    1. This table or related slice is empty.
    1. USAdrian Taylor
    plurals
    1. This table or related slice is empty.
    1. This table or related slice is empty.
    1. This table or related slice is empty.
    1. This table or related slice is empty.
    1. VO
      singulars
      1. PO
      1. This table or related slice is empty.
      1. VTUpMod
    1. This table or related slice is empty.
 

Querying!

 
Guidance
A row detail

Detail views are divided into sections. All the information in the data section comes from columns in the selected row. The other sections display data from other, related rows.

Related data can be related in a to-one or a to-many fashion. Captions of data related in a to-many fashion link to a list view showing a filtered view of the table.

Try moving around until you find a non-empty to-many entry and click on the label to get to one. You can move back to the root by clicking on the database name in the header.

SQuiL has stopped working due to an internal error.

If you are curious you may find further information in the browser console, which is accessible through the devtools (F12).

Reload