StackOverflow2013

Note that there are some explanatory texts on larger screens.

plurals

POGammu cannot detect my modem
primarykey
Id
19698481
data
AcceptedAnswerId
0
AnswerCount
2
ClosedDate
CommentCount
0
CommunityOwnedDate
CreationDate
2013-10-31T04:31:48.767
FavoriteCount
2
LastActivityDate
2017-04-11T06:49:27.340
LastEditDate
2015-03-19T15:42:22.067
LastEditorUserId
225718
OwnerUserId
746455
ParentId
0
PostTypeId
1
Score
1
ViewCount
16306
LastEditorDisplayName
text
Body
I want to use gammu for sending sms. I have problem when want to identify the phone from gammu utility Environment used: - openSUSE 12.3 32-bit - Gammu version 1.32.0 built 09:27 on Aug 10 2012 using GCC 4.7 <pre><code>> gammu -f /var/log/gammulog identify </code></pre> <blockquote> No response in specified timeout. Probably phone not connected. </blockquote> I make sure my modem is connected to my laptop <pre><code>> lsusb Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 003 Device 019: ID 12d1:1001 Huawei Technologies Co., Ltd. E169/E620/E800 HSDPA Modem Bus 003 Device 002: ID 04f2:b3bb Chicony Electronics Co., Ltd Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 006: ID 093a:2510 Pixart Imaging, Inc. Optical Mouse Bus 001 Device 005: ID 0cf3:3004 Atheros Communications, Inc. Bus 001 Device 004: ID 0bda:0129 Realtek Semiconductor Corp. RTS5129 Card Reader Controller </code></pre> Then I check using this command to make sure the modem is detected <pre><code>> ls /dev/serial/by-id -l lrwxrwxrwx 1 root root 13 Oct 31 11:16 usb-HSDPA_USB_Modem_HSDPA_USB_Modem-if00-port0 -> ../../ttyUSB0 lrwxrwxrwx 1 root root 13 Oct 31 11:16 usb-HSDPA_USB_Modem_HSDPA_USB_Modem-if01-port0 -> ../../ttyUSB1 lrwxrwxrwx 1 root root 13 Oct 31 11:16 usb-HSDPA_USB_Modem_HSDPA_USB_Modem-if02-port0 -> ../../ttyUSB2 lrwxrwxrwx 1 root root 13 Oct 31 11:16 usb-HSDPA_USB_Modem_HSDPA_USB_Modem-if03-port0 -> ../../ttyUSB3 </code></pre> When call the gammu-detect <pre><code>[gammu] device = /dev/ttyUSB0 name = Phone on USB serial port HSDPA_USB_Modem HSDPA_USB_Modem connection = at [gammu1] device = /dev/ttyUSB1 name = Phone on USB serial port HSDPA_USB_Modem HSDPA_USB_Modem connection = at [gammu2] device = /dev/ttyUSB2 name = Phone on USB serial port HSDPA_USB_Modem HSDPA_USB_Modem connection = at [gammu3] device = /dev/ttyUSB3 name = Phone on USB serial port HSDPA_USB_Modem HSDPA_USB_Modem connection = at [gammu4] device = /dev/ttyS0 name = Phone on serial port 0 connection = at [gammu5] device = /dev/ttyS1 name = Phone on serial port 1 connection = at [gammu6] device = /dev/ttyS2 name = Phone on serial port 2 connection = at [gammu7] device = /dev/ttyS3 name = Phone on serial port 3 connection = at [gammu8] device = /dev/ttyS4 name = Phone on serial port 4 connection = at [gammu9] device = /dev/ttyS5 name = Phone on serial port 5 connection = at [gammu10] device = /dev/ttyS6 name = Phone on serial port 6 connection = at [gammu11] device = /dev/ttyS7 name = Phone on serial port 7 connection = at opening socket: No such device </code></pre> Here is the gammu-config, placed in /etc/gammurc <pre><code>[gammu] port = /dev/ttyUSB0 connection = at115200 logformat = textall </code></pre> I really stuck, don't know what's wrong Even when using wammu (GUI version), to detect phones <pre><code>Wammu is now searching for phone: Checking /dev/ttyUSB0 - ['at19200', 'at115200', 'fbusdlr3', 'fbus', 'mbus', 'fbuspl2303'] Checking /dev/ttyUSB1 - ['at19200', 'at115200', 'fbusdlr3', 'fbus', 'mbus', 'fbuspl2303'] Checking /dev/ttyUSB2 - ['at19200', 'at115200', 'fbusdlr3', 'fbus', 'mbus', 'fbuspl2303'] Checking /dev/ttyUSB3 - ['at19200', 'at115200', 'fbusdlr3', 'fbus', 'mbus', 'fbuspl2303'] Finished /dev/ttyUSB2 - ['at19200', 'at115200', 'fbusdlr3', 'fbus', 'mbus', 'fbuspl2303'] Finished /dev/ttyUSB0 - ['at19200', 'at115200', 'fbusdlr3', 'fbus', 'mbus', 'fbuspl2303'] Finished /dev/ttyUSB3 - ['at19200', 'at115200', 'fbusdlr3', 'fbus', 'mbus', 'fbuspl2303'] Finished /dev/ttyUSB1 - ['at19200', 'at115200', 'fbusdlr3', 'fbus', 'mbus', 'fbuspl2303'] All finished, found 0 phones No phone has been found! </code></pre> Thanks Updated Here is add some log that happen when I specify the log file <pre><code>> tail -f gammu.log Thu 2013/10/31 11:55:14: [Gammu - 1.32.0 built 09:27 Aug 10 2012 using GCC 4.7] Thu 2013/10/31 11:55:14: [Connection - "at"] Thu 2013/10/31 11:55:14: [Connection index - 0] Thu 2013/10/31 11:55:14: [Model type - ""] Thu 2013/10/31 11:55:14: [Device - "/dev/ttyUSB0"] Thu 2013/10/31 11:55:14: [Running on - Linux, kernel 3.7.10-1.16-desktop (#1 SMP PREEMPT Fri May 31 20:21:23 UTC 2013 (97c14ba))] Thu 2013/10/31 11:55:14: Serial device: DTR is up, RTS is up, CAR is up, CTS is up Thu 2013/10/31 11:55:14: Setting speed to 19200 Thu 2013/10/31 11:55:14: [Module - "auto"] Thu 2013/10/31 11:55:14: Escaping SMS mode Thu 2013/10/31 11:55:14: Sending simple AT command to wake up some devices Thu 2013/10/31 11:55:14: 1 "OK" Thu 2013/10/31 11:55:14: Checking line: OK Thu 2013/10/31 11:55:14: AT reply state: 1 Thu 2013/10/31 11:55:14: Enabling echo Thu 2013/10/31 11:55:15: 1 "OK" Thu 2013/10/31 11:55:15: Checking line: OK Thu 2013/10/31 11:55:15: AT reply state: 1 Thu 2013/10/31 11:55:15: Trying Motorola mode switch Thu 2013/10/31 11:55:15: 1 "ERROR" Thu 2013/10/31 11:55:15: Checking line: ERROR Thu 2013/10/31 11:55:15: AT reply state: 3 Thu 2013/10/31 11:55:15: Thu 2013/10/31 11:55:15: Frame not request now. If you can, please report it (see <http://wammu.eu/support/bugs/>). Thank you Thu 2013/10/31 11:55:15: LAST SENT frame type 0x00/length 10 Thu 2013/10/31 11:55:15: 41A|54T|2B+|4DM|4FO|44D|45E|3D=|322|0D AT+MODE=2. Thu 2013/10/31 11:55:15: RECEIVED frame type 0x00/length 0x7/7 Thu 2013/10/31 11:55:15: 45E|52R|52R|4FO|52R|0D |0A ERROR.. Thu 2013/10/31 11:55:15: Thu 2013/10/31 11:55:17: Seems not to be supported Thu 2013/10/31 11:55:17: Enabling CME errors Thu 2013/10/31 11:55:17: 1 "OK" Thu 2013/10/31 11:55:17: Checking line: OK Thu 2013/10/31 11:55:17: AT reply state: 1 Thu 2013/10/31 11:55:17: Thu 2013/10/31 11:55:17: Frame not request now. If you can, please report it (see <http://wammu.eu/support/bugs/>). Thank you Thu 2013/10/31 11:55:17: LAST SENT frame type 0x00/length 10 Thu 2013/10/31 11:55:17: 41A|54T|2B+|43C|4DM|45E|45E|3D=|311|0D AT+CMEE=1. Thu 2013/10/31 11:55:17: RECEIVED frame type 0x00/length 0x4/4 Thu 2013/10/31 11:55:17: 4FO|4BK|0D |0A OK.. Thu 2013/10/31 11:55:17: Thu 2013/10/31 11:55:19: 1 "OK" Thu 2013/10/31 11:55:19: Checking line: OK Thu 2013/10/31 11:55:19: AT reply state: 1 Thu 2013/10/31 11:55:19: Thu 2013/10/31 11:55:19: Frame not request now. If you can, please report it (see <http://wammu.eu/support/bugs/>). Thank you Thu 2013/10/31 11:55:19: LAST SENT frame type 0x00/length 10 Thu 2013/10/31 11:55:19: 41A|54T|2B+|43C|4DM|45E|45E|3D=|322|0D AT+CMEE=2. Thu 2013/10/31 11:55:19: RECEIVED frame type 0x00/length 0x4/4 Thu 2013/10/31 11:55:19: 4FO|4BK|0D |0A OK.. Thu 2013/10/31 11:55:19: Thu 2013/10/31 11:55:21: CME errors could not be enabled, some error types won't be detected. Thu 2013/10/31 11:55:21: 1 "+CSCS: "IRA"" Thu 2013/10/31 11:55:21: 2 "OK" Thu 2013/10/31 11:55:21: Checking line: OK Thu 2013/10/31 11:55:21: AT reply state: 1 Thu 2013/10/31 11:55:21: Thu 2013/10/31 11:55:21: UNKNOWN frame. If you can, please report it (see <http://wammu.eu/support/bugs/>). Thank you Thu 2013/10/31 11:55:21: LAST SENT frame type 0x00/length 9 Thu 2013/10/31 11:55:21: 41A|54T|2B+|43C|53S|43C|53S|3F?|0D AT+CSCS?. Thu 2013/10/31 11:55:21: RECEIVED frame type 0x00/length 0x14/20 Thu 2013/10/31 11:55:21: 2B+|43C|53S|43C|53S|3A:|20 |22"|49I|52R|41A|22"|0D |0A |0D |0A +CSCS: "IRA".... Thu 2013/10/31 11:55:21: 4FO|4BK|0D |0A OK.. Thu 2013/10/31 11:55:21: Thu 2013/10/31 11:55:23: Init:GSM_TryGetModel failed with error TIMEOUT[14]: No response in specified timeout. Probably phone not connected. Thu 2013/10/31 11:55:23: [Terminating] Thu 2013/10/31 11:55:23: [Closing] </code></pre> In the beginning part everything is OK We i look more details in this part everything is success <pre><code>Thu 2013/10/31 11:55:14: Sending simple AT command to wake up some devices Thu 2013/10/31 11:55:14: 1 "OK" Thu 2013/10/31 11:55:14: Checking line: OK Thu 2013/10/31 11:55:14: AT reply state: 1 Thu 2013/10/31 11:55:14: Enabling echo Thu 2013/10/31 11:55:15: 1 "OK" Thu 2013/10/31 11:55:15: Checking line: OK Thu 2013/10/31 11:55:15: AT reply state: 1 </code></pre> Error occured in this part. It's like detecting this is Motorola, but I'm using Huawei E169 <pre><code>Thu 2013/10/31 14:13:16: Trying Motorola mode switch Thu 2013/10/31 14:13:16: SENDING frametype 0x00/length 0x0A/10 Thu 2013/10/31 14:13:16: 41A|54T|2B+|4DM|4FO|44D|45E|3D=|322|0D AT+MODE=2. Thu 2013/10/31 14:13:16: 1 "ERROR" Thu 2013/10/31 14:13:16: Checking line: ERROR </code></pre> Update I try to use other modem ZTE MF288, and it works just fine. Still don't know how to configure Huawei E169
Tags
<sms><gammu>
Title
Gammu cannot detect my modem
singulars
PostAcceptedAnswerId
1. This table or related slice is empty.
PostParentId
1. This table or related slice is empty.
PostTypePostTypeId
1. PTQuestion
UserLastEditorUserId
1. USMichal Čihař
UserOwnerUserId
1. USWen
plurals
PostLinksPostIdRelatedPostId
1. This table or related slice is empty.
PostLinksRelatedPostIdPostId
1. This table or related slice is empty.
PostsAcceptedAnswerId
1. This table or related slice is empty.
PostsParentIdCreationDate
1. PO
 singulars
 PostTypePostTypeId
 PTAnswer
VotesPostIdCreationDate
1. This table or related slice is empty.
CommentsPostId
1. This table or related slice is empty.

Querying!

Guidance

A row detail

Detail views are divided into sections. All the information in the data section comes from columns in the selected row. The other sections display data from other, related rows.

Related data can be related in a to-one or a to-many fashion. Captions of data related in a to-many fashion link to a list view showing a filtered view of the table.

Try moving around until you find a non-empty to-many entry and click on the label to get to one. You can move back to the root by clicking on the database name in the header.