Databases
StackOverflow2013
Postsdbo
POnumTicks variable not incrementing
 

Note that there are some explanatory texts on larger screens.

plurals
  1. POnumTicks variable not incrementing
    primarykey
    data
    text
    <p>I have the following sketch, and the numTicks variable is not incrementing, the sketch compiles fine to the Arduino, but for whatever reason the variable "numTicks" is not incrementing.</p> <pre><code>/* * kegboard-clone-4-KegCop * This code is public domain * * This sketch sends a receives a multibyte String from the iPhone * and performs functions on it. * * This Arduino sketch is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU Public License * along with this sketch. If not, see &lt;http://www.gnu.org/licenses/&gt;. * * Examples: * http://arduino.cc/en/Tutorial/SerialEvent * http://arduino.cc/en/Serial/read * http://stackoverflow.com/questions/16532586/arduino-sketch-that-responds-to-certain-commands-how-is-it-done/ * http://davebmiller.wordpress.com/2011/01/18/arduino-flowmeter/ * http://forum.arduino.cc/index.php?topic=52003.0 * http://arduino.cc/en/Reference/AttachInterrupt * https://github.com/just-kile/Zapfmaster2000/blob/master/src/zapfmaster2000-zapfkit-avr/draftkitAVR.ino * * TODO: * - eventually get code working with the SF800 flow sensor / flowmeter * */ // flow_A LED int led = 4; // relay_A const int RELAY_A = A0; // string / serial event variables String inputString = ""; // a string to hold incoming data boolean stringComplete = false; // whether the string is complete boolean valve_open = false; // FLOWMETER SHIT // flowmeter 0 pulse (input) = digital pin 2 // https://github.com/Kegbot/kegboard/blob/master/arduino/kegboard/kegboard_config.h // which pin to use for reading the sensor? kegboard-mini shield has digital pin 2 allocated // the SF800 outputs 5400 pulses per litre // The hall-effect flow sensor (SF800) outputs approximately 5400 pulses per second per litre/minute of flow // SF800 default (5400 ticks/Liter == 5.4 ticks/mL == 1/5.4 mL/tick) int flowmeterInterrupt = 0; // changed from byte int flowmeterPin = 2; // changed from byte int flowmeterPinState = 0; // variable for storing state of sensor pin // read RPM int rpmcount = 0; int rpm = 0; unsigned long lastmillis = 0; // NEW GLOBALS - 29JUL13 // initial ticks on flow meter volatile unsigned int numTicks = 0; // interval for flow meter frequency int interval = 250; volatile long previousMillis = 0; void setup() { // initialize serial // Serial.flush(); // flush the serial buffer on setup. Serial.begin(115200); // open serial port, sets data rate to 9600bps Serial.println("Power on test"); inputString.reserve(200); valve_open = false; // relay for solenoid cut off valve pinMode(RELAY_A, OUTPUT); // flowmeter shit pinMode(flowmeterPin, INPUT); digitalWrite(flowmeterPin, HIGH); // Need to set these HIGH so they won't just tick away // The Hall-effect sensor is connected to pin 2 which uses interrupt 0. // Configured to trigger on a RISING state change (transition from HIGH // state to LOW state) attachInterrupt(flowmeterInterrupt, count, RISING); } void open_valve() { digitalWrite(RELAY_A, HIGH); // turn RELAY_A on valve_open = true; } void close_valve() { digitalWrite(RELAY_A, LOW); // turn RELAY_A off valve_open = false; } void flow_A_blink() { digitalWrite(led, HIGH); // turn the LED on (HIGH is the voltage level) delay(1000); // wait for one second digitalWrite(led, LOW); // turn the LED off by making the voltage LOW delay(1000); // wait for a second } void flow_A_blink_stop() { digitalWrite(led, LOW); } void flow_A_on() { digitalWrite(led, HIGH); // turn the LED on (HIGH is the voltage level) } void flow_A_off() { digitalWrite(led, LOW); // turn the LED off by making the voltage LOW } // flowmeter shit void getFlow4() { // Serial.println("im here"); // Serial.println(sensorPin); flowmeterPinState = digitalRead(flowmeterPin); // Serial.println(sensorPinState); volatile unsigned long currentMillis = millis(); // if the predefined interval has passed if(currentMillis - previousMillis &gt; interval) { // Uptade every 1/4 second, this will be equal to reading frecuency (Hz). // disconnect flow meter from interrupt detachInterrupt(flowmeterInterrupt); // Disable interrupt when calculating // check, whether any flow was detected if (numTicks &gt;= 0) { // start message to computer with tick message symbol Serial.print("Ticks:"); // send amount of ticks for last interval Serial.print(numTicks); } // clean buffer Serial.flush(); // reset amount of ticks numTicks = 0; // set new start value for interval counter previousMillis = currentMillis; // reattach interrupt attachInterrupt(flowmeterInterrupt, count, RISING); } if(flowmeterPinState == LOW) { flow_A_off(); // Serial.println("don't blink"); } if(flowmeterPinState == HIGH) { flow_A_on(); // Serial.println("blink damnit"); } if(stringComplete) { if(inputString.equals("{close_valve}\n")) { // Serial.println("close vavle."); close_valve(); } return; } } // flow meter interrupt function void count(){ numTicks++; } /* * Main program loop, runs over and over repeatedly */ void loop() { if(stringComplete) { // Serial.println(inputString); if(inputString.equals("{open_valve}\n")) { // Serial.println("inputString equates :)"); open_valve(); } if(inputString.equals("{close_valve}\n")) { // Serial.println("close vavle."); close_valve(); } if(valve_open) { // Serial.println("valve_open = true"); inputString = ""; stringComplete = false; while(numTicks &lt;= 1000) { getFlow4(); } } // clear the string: inputString = ""; stringComplete = false; } //Serial.println("over and over"); } /* SerialEvent occurs whenever a new data comes in the hardware serial RX. This routine is run between each time loop() runs, so using delay inside loop can delay response. Multiple bytes of data may be available. */ void serialEvent() { while(Serial.available()) { // get the new byte: char inChar = (char)Serial.read(); // add it to the inputString: inputString += inChar; // if the incoming character is a newline, set a flag // so the main loop can do something about it: if (inChar == '\n') { stringComplete = true; } // Serial.println(inputString.length()); } } </code></pre>
    singulars
    1. PO
      singulars
      1. PTAnswer
    1. This table or related slice is empty.
    1. PTQuestion
    1. USUdo Klein
    1. USChris
    plurals
    1. PL
      singulars
      1. LTLinked
    1. This table or related slice is empty.
    1. This table or related slice is empty.
    1. PO
      singulars
      1. PTAnswer
    2. PO
      singulars
      1. PTAnswer
    3. PO
      singulars
      1. PTAnswer
    1. This table or related slice is empty.
    1. This table or related slice is empty.
 

Querying!

 
Guidance
A row detail

Detail views are divided into sections. All the information in the data section comes from columns in the selected row. The other sections display data from other, related rows.

Related data can be related in a to-one or a to-many fashion. Captions of data related in a to-many fashion link to a list view showing a filtered view of the table.

Try moving around until you find a non-empty to-many entry and click on the label to get to one. You can move back to the root by clicking on the database name in the header.

SQuiL has stopped working due to an internal error.

If you are curious you may find further information in the browser console, which is accessible through the devtools (F12).

Reload