Databases
StackOverflow2013
Postsdbo
PO
 

Note that there are some explanatory texts on larger screens.

plurals
  1. PO
    primarykey
    data
    text
    <p>the gyro you have might be a post-filtered one, i found this in some of the SAMSUNG I9100 devices. they use gyros produced by INVENSENSE CORP.</p> <blockquote> <blockquote> <blockquote> <blockquote> <blockquote> <blockquote> <blockquote> <blockquote> <p>edit 2014/12/10 for commenting @Lourenço Castro i believe @Lourenço Castro was right about the 'factory drift'(or zero-drift) and 'accumulated drift';</p> </blockquote> </blockquote> </blockquote> </blockquote> </blockquote> </blockquote> </blockquote> </blockquote> <p>Concerning to complementary/kalman filters, on Android, the 6dof(ACC+GYRO) impl. works fine, it can remove both factory and accumulated drift of gyroscope thanks to accelerometer's calibration; </p> <p>However, the 9dof impl., or adding a magnetometer sensor into consideration, filter runs into status you dont want. According to my tests, it is caused by uncalibed status of magnetometer which need guys to shake (known as drawing 'eight')the phone to remove before fusion. </p> <p>9dof provides a full rotation estimation while 6dof can not handle the accumulated drift of rotating around y axis(see android's ref. for axis definition). And I dont think that 'shaking-and-drawing-number-8' before one starts an app is a good UE, so we have to go back to 6dof method and try to find a way to remove factory drift of rotation around y-axis.</p> <p>(a lot of boring but amazing content about complementary/kalman filter should be here. but i guess those come here already know it.)</p> <p>You can try a 360 panorama app included in Google Camera which can be downloaded from market. This app use a visual-aid(image processing based motion estimation) for calibrating the sensor before we really start to capturing, it's easy to verify this. And no use of Magnetometer, i guess.</p> <p>So my advice to use sensor-fusion on Android is: 1. no magnetometer; (dont know if this is a hardware problem or can be solved by software.) 2. accelerometer+gyroscope provides smooth and stable 6dof motion estimation; 3. try to solve the drift around y-axis, mainly means that visual-method should be added to; 4. try 3 and try 3...</p> <p>Maybe someone will run into this question and i hope all above might be helpful. thanks to those posts related to this questions on StackOverflow. i dont remember your names exactly but you all helped me a lot. :)</p>
    singulars
    1. This table or related slice is empty.
    1. POGyroscope does not show any drift
      singulars
      1. PTQuestion
    1. PTAnswer
    1. USiicodec
    1. USiicodec
    plurals
    1. This table or related slice is empty.
    1. This table or related slice is empty.
    1. POGyroscope does not show any drift
      singulars
      1. PTQuestion
    1. This table or related slice is empty.
    1. VO
      singulars
      1. PO
      1. This table or related slice is empty.
      1. VTAcceptedByOriginator
    2. VO
      singulars
      1. PO
      1. This table or related slice is empty.
      1. VTUpMod
    1. COThanks for your reply. How can I find out whether I have one from Invensense or another one. Do you have additional information how they are filtered?
      singulars
      1. PO
      1. USfkerber
    2. COSensor.getType () Sensor.getVendor () might help you. you will find the type of sensor. check the type if the output has been filtered by fusion algorithm using accelerometer and compass.
      singulars
      1. PO
      1. USiicodec
    3. COOk, I checked the vendor now - and indeed, it is Invensense. So your guess might be correct. Thanks again.
      singulars
      1. PO
      1. USfkerber
 

Querying!

 
Guidance
A row detail

Detail views are divided into sections. All the information in the data section comes from columns in the selected row. The other sections display data from other, related rows.

Related data can be related in a to-one or a to-many fashion. Captions of data related in a to-many fashion link to a list view showing a filtered view of the table.

Try moving around until you find a non-empty to-many entry and click on the label to get to one. You can move back to the root by clicking on the database name in the header.

SQuiL has stopped working due to an internal error.

If you are curious you may find further information in the browser console, which is accessible through the devtools (F12).

Reload