Databases
StackOverflow2013
Postsdbo
PO
 

Note that there are some explanatory texts on larger screens.

plurals
  1. PO
    primarykey
    data
    text
    <p>From the <a href="http://support.amd.com/us/Processor_TechDocs/24593_APM_v2.pdf">AMD Architecture Programmer's Manual Volume 2: System Programming</a>, section 4.5.3:</p> <blockquote> <p><strong>FS and GS Registers in 64-Bit Mode.</strong> Unlike the CS,DS,ES, and SS segments, the FS and GS segment overrides can be used in 64-bit mode. When FS and GS segment overrides are used in 64-bit mode, their respective base addresses are used in the effective-address (EA) calculation. The complete EA calculation then becomes (FS or GS).base + base + (scale * index) + displacement. The FS.base and GS.base values are also expanded to the full 64-bit virtual-address size, as shown in Figure 4-5. The resulting EA calculation is allowed to wrap across positive and negative addresses.</p> <p>[...]</p> <p>There are two methods to update the contents of the FS.base and GS.base hidden descriptor fields. The first is available exclusively to privileged software (CPL = 0). The FS.base and GS.base hidden descriptor-register fields are mapped to MSRs. Privileged software can load a 64-bit base address in canonical form into FS.base or GS.base using a single WRMSR instruction. The FS.base MSR address is C000_0100h while the GS.base MSR address is C000_0101h.</p> <p>The second method of updating the FS and GS base fields is available to software running at any privilege level (when supported by the implementation and enabled by setting CR4[FSGSBASE]). The WRFSBASE and WRGSBASE instructions copy the contents of a GPR to the FS.base and GS.base fields respectively. When the operand size is 32 bits, the upper doubleword of the base is cleared. WRFSBASE and WRGSBASE are only supported in 64-bit mode.</p> </blockquote>
    singulars
    1. This table or related slice is empty.
    1. PODetail about MSR_GS_BASE in linux x86 64
      singulars
      1. PTQuestion
    1. PTAnswer
    1. This table or related slice is empty.
    1. USGeoff Reedy
    plurals
    1. This table or related slice is empty.
    1. This table or related slice is empty.
    1. PODetail about MSR_GS_BASE in linux x86 64
      singulars
      1. PTQuestion
    1. This table or related slice is empty.
    1. VO
      singulars
      1. PO
      1. This table or related slice is empty.
      1. VTUpMod
    2. VO
      singulars
      1. PO
      1. This table or related slice is empty.
      1. VTUpMod
    3. VO
      singulars
      1. PO
      1. This table or related slice is empty.
      1. VTUpMod
    1. COthanks!It's a great help!!
      singulars
      1. PO
      1. UShellolwq
 

Querying!

 
Guidance
A row detail

Detail views are divided into sections. All the information in the data section comes from columns in the selected row. The other sections display data from other, related rows.

Related data can be related in a to-one or a to-many fashion. Captions of data related in a to-many fashion link to a list view showing a filtered view of the table.

Try moving around until you find a non-empty to-many entry and click on the label to get to one. You can move back to the root by clicking on the database name in the header.

SQuiL has stopped working due to an internal error.

If you are curious you may find further information in the browser console, which is accessible through the devtools (F12).

Reload