StackOverflow2013

Note that there are some explanatory texts on larger screens.

plurals

POInstalling CGI, DBI and DBD::Oracle with Solaris 11 64-bit
primarykey
Id
10745271
data
AcceptedAnswerId
10911886
AnswerCount
3
ClosedDate
CommentCount
11
CommunityOwnedDate
CreationDate
2012-05-24T21:05:14.063
FavoriteCount
2
LastActivityDate
2012-06-07T13:48:26.040
LastEditDate
2012-06-06T17:14:22.320
LastEditorUserId
810860
OwnerUserId
810860
ParentId
0
PostTypeId
1
Score
2
ViewCount
9824
LastEditorDisplayName
text
Body
I tried to install <a href="http://p3rl.org/CGI" rel="nofollow">CGI</a>, <a href="http://p3rl.org/DBI" rel="nofollow">DBI</a> and <a href="http://p3rl.org/DBD%3a%3aOracle" rel="nofollow">DBD::Oracle</a> and drivers in a 64-bit Solaris environment, but to little avail. The number of errors I have encountered is mind-boggling and the number of workaround solutions I have tried - from changing environment variables, changing directory references, moving and copying files, changing compilers, etc. - is even worse. And the worst part is that there is very little documentation for installing said modules in the newest version of Solaris. Here are the initial steps we have been going through. <ol> <li>First we go to <a href="http://search.cpan.org/" rel="nofollow">http://search.cpan.org/</a>. Then we download: <ul> <li><a href="http://search.cpan.org/dist/CGI/" rel="nofollow">http://search.cpan.org/dist/CGI/</a></li> <li><a href="http://search.cpan.org/dist/DBI/" rel="nofollow">http://search.cpan.org/dist/DBI/</a></li> <li><a href="http://search.cpan.org/dist/DBD-Oracle/" rel="nofollow">http://search.cpan.org/dist/DBD-Oracle/</a></li> </ul></li> <li>Next we open up a terminal window, switch to root, then navigate to our "Downloads" folder.</li> <li>From here we decompress the previously downloaded files (no problems here): <pre><code>gunzip -c CGI.pm-3.59.tar.gz |tar xvf - gunzip -c DBI-1.621.tar.gz |tar xvf - gunzip -c DBD-Oracle-1.44.tar.gz |tar xvf - </code></pre></li> <li>Then we archive the tar files in case we might need them later on. <pre><code>mkdir archive_tar mv *.gz $HOME/Downloads/archive_tar </code></pre></li> <li>Here is where it gets slightly confusing, as we are not sure if these steps are completely necessary. Basically, we believe we need to set up the correct Perl (64-bit required for the newest Oracle, default Perl used is 32-bit). <ol> <li>Type <code>which perl</code> in order to determine which current version of Perl you are using. It should indicate you are using the default version (or 32-bit).</li> <li>Verify that you have a 64-bit Perl installation available by doing the following: type <code>file /opt/oracle/rdbms/perl/bin/perl</code></li> <li>You should see <code>ELF 64-bit LSB executable AMD64 Version 1 [SSE2 SSE FXSR CMOV FPU], dynamically linked, not stripped<</code>.</li> <li>Switch to using this version of Perl by adding it to the <code>PATH</code> variable: <code>export PATH=/opt/oracle/rdbms/perl/bin:$PATH</code></li> <li>Type <code>which perl</code>. Verify that this now shows the Perl located at <code>opt/oracle/rdbms/perl/bin/perl</code>.</li> <li>Type <code>perl -V</code>, if it shows errors, set the variables below: <pre><code>export PERL5LIB=/opt/oracle/rdbms/perl/lib/5.10.0 export PERLLIB=/opt/oracle/rdbms/perl/lib/5.10.0 </code></pre></li> </ol></li> <li>Now we set up <code>cc</code> (the compiler) to work so that we can install CGI/DBI/DBD-Oracle. <ol> <li>Type <code>cc --version</code> to verify that it says <code>cc</code> is not found.</li> <li>Open up a browser and navigate to <a href="http://www.oracle.com/technetwork/server-storage/solarisstudio/downloads/index.html" rel="nofollow">Solaris Studio</a>. Here you will find a package which contains Sun's compiler.</li> <li>Download "Tarfile on Solaris SPARC" for the Solaris 11 OS Platform.</li> <li>In your terminal window, decompress the above file by typing: <code>bzcat SolarisStudio12.3-solaris-sparc-bin.tar.bz2 | tar xf -</code></li> <li>Move the <code>.bz2</code> file to our previously created archive folder: <code>mv SolarisStudio12.3-solaris-sparc-bin.tar.bz2 $HOME/Downloads/archive_tar</code></li> <li>Now we want to add the new compiler to our path, we do this through: <code>export PATH=$PATH:/home/oracle/Downloads/SolarisStudio12.3-solaris-sparc-bin/solarisstudio12.3/bin</code></li> <li>Type <code>cc --version</code>, this command shouldn't do anything (possibly throw a few warnings), but it won't say <code>cc not found</code> anymore.</li> </ol></li> <li>Here we begin to install the modules and the driver, starting with the CGI module: <ol> <li>Navigate to <code>$HOME/Downloads/CGI.pm-3.59</code></li> <li>Type <code>perl Makefile.PL</code></li> <li>We need to change the make file to point to the correct location. <ol> <li>Type <code>vi Makefile</code></li> <li><code>:%s,../lib/site_perl/5.10.0,/opt/oracle/rdbms/perl/lib/site_perl/5.10.0,g</code></li> <li><code>:%s,../lib/5.10.0,/opt/oracle/rdbms/perl/lib/5.10.0,g</code></li> </ol></li> <li>Now type <code>make</code></li> <li>Then type <code>make install</code></li> <li>Next we move onto the DBI module. Navigate to <code>$HOME/Downloads/DBI-1.621</code>.</li> <li>Type <code>perl Makefile.PL</code></li> <li>Again, we need to change this make file to point to the correct location. <ol> <li>Type <code>vi Makefile</code></li> <li><code>:%s,../lib/site_perl/5.10.0,/opt/oracle/rdbms/perl/lib/site_perl/5.10.0,g</code></li> <li><code>:%s,../lib/5.10.0,/opt/oracle/rdbms/perl/lib/5.10.0,g</code></li> </ol></li> <li>However, these change two lines that we don't want to change. So do a find for <code>MAKEMAKER</code> and <code>XSUBPPDIR</code> and set them back to the below values. <pre><code>MAKEMAKER = /opt/oracle/rdbms/perl/lib/5.10.0/ExtUtils/MakeMaker.pm XSUBPPDIR = /opt/oracle/rdbms/perl/lib/5.10.0/ExtUtils </code></pre></li> <li>Now type <code>make</code></li> <li>Then type <code>make install</code></li> <li>Now navigate to <code>$HOME/Downloads/DBD-Oracle-1.44</code></li> <li>Type <code>perl Makefile.PL</code></li> </ol></li> </ol> And that is basically where we get a fatal error at line 21, <code>use DBI 1.51;</code> in the Makefile, and tracing up the stack indicates that <code>@INC</code> cannot locate <code>DBI.pm</code>. That is why I tried to move the binary library file. I can't access the Solaris box at this moment so I can't re-post the exact error code, I should be able to include that probably Tuesday (the earliest I can get back to the machine). Does anyone have any ideas to this point though? <h1>alternative route using CPAN shell</h1> <ol> <li>Open up a terminal window and install the following packages as the <code>root</code> user: <pre><code>pkg install system/header pkg install gcc-45 pkg install developer/build/gnu-make pkg install archiver/gnu-tar </code></pre></li> <li>Navigate to $oracle_home <code>cd $oracle_home</code> and: <pre><code>mkdir /apps mkdir /apps/twiki-root mkdir /apps/twiki-root/perlmodules </code></pre></li> <li>Modify the <code>PERL5LIB</code> environment variable: <ul> <li><code>export PERL5LIB=/apps/twiki-root/perlmodules</code></li> <li>Verify by typing: <code>echo $PERL5LIB</code></li> </ul></li> <li>Open up the CPAN shell and update it: <pre><code>/usr/perl5/bin/perlgcc -MCPAN -e shell </code></pre> If this is the first time, press <code>return</code> to accept auto-configuration. And now enter the following commands to modify the mirror location for CPAN: <pre><code>o conf urllist shift o conf urllist o conf urllist unshift http://mirror.ox.ac.uk/sites/www.cpan.org/ o conf urllist o conf commit install Bundle::CPAN reload cpan </code></pre></li> <li>Open up the <code>Config.pm</code> file and modify it as described below: <pre><code>cd /usr/perl5/5.12/lib/CPAN/ vi Config.pm </code></pre> Modify these values: <pre><code>'make' => q[/usr/sfw/bin/gmake], 'make_install_make_command' => q[/usr/sfw/bin/gmake], 'makepl_arg' => q[LIB=/apps/twiki-root/perlmodules PREFIX=/apps/twiki-root/perlmodules INSTALLMAN3DIR=/apps/twiki-root/perlmodules/man/man3], 'mbuild_arg' => q[--install_base /apps/twiki-root/perlmodules], 'mbuild_install_arg' => q[--install_base /apps/twiki-root/perlmodules], 'mbuildpl_arg' => q[--install_base /apps/twiki-root/perlmodules], 'prefs_dir' => q[~/.cpan/prefs], 'tar' => q[/usr/sfw/bin/gtar], </code></pre> Write/save to the file and quit → <code>:wq</code></li> <li>Make sure that your <code>gcc</code> is set: Verify by: <code>which gcc</code></li> <li>Now once again open up the CPAN shell and begin to install the DBI module. <pre><code>/usr/perl5/bin/perlgcc -MCPAN -e shell install DBI </code></pre></li> </ol> And this is where everything just goes to crap. Error: <pre><code>Reading '/home/oracle/.cpan/Metadata' Database was generated on Sun, 03 Jun 2012 22:27:03 GMT Running install for module 'DBI' Running make for T/TI/TIMB/DBI-1.621.tar.gz Subroutine config redefined at /usr/perl5/5.12/lib/CPAN/LWP/UserAgent.pm line 12. Subroutine get_basic_credentials redefined at /usr/perl5/5.12/lib/CPAN/LWP/UserAgent.pm line 23. Subroutine no_proxy redefined at /usr/perl5/5.12/lib/CPAN/LWP/UserAgent.pm line 32. Subroutine mirror redefined at /usr/perl5/5.12/lib/CPAN/LWP/UserAgent.pm line 67. Fetching with HTTP::Tiny: http://mirror.ox.ac.uk/sites/www.cpan.org/authors/id/T/TI/TIMB/DBI-1.621.tar.gz Fetching with HTTP::Tiny: http://mirror.ox.ac.uk/sites/www.cpan.org/authors/id/T/TI/TIMB/CHECKSUMS Checksum for /home/oracle/.cpan/sources/authors/id/T/TI/TIMB/DBI-1.621.tar.gz ok Scanning cache /home/oracle/.cpan/build for sizes ............................................................................DONE CPAN.pm: Building T/TI/TIMB/DBI-1.621.tar.gz *** Your LANG environment variable is set to 'en_US.UTF-8' *** This may cause problems for some perl installations. *** If you get test failures, please try again with LANG unset. *** If that then works, please email dbi-dev@perl.org with details *** including the output of 'perl -V' Creating test wrappers for DBD::Gofer: t/zvg_01basics.t t/zvg_02dbidrv.t t/zvg_03handle.t t/zvg_04mods.t t/zvg_05concathash.t t/zvg_06attrs.t t/zvg_07kids.t t/zvg_08keeperr.t t/zvg_09trace.t t/zvg_10examp.t t/zvg_11fetch.t t/zvg_12quote.t t/zvg_13taint.t t/zvg_14utf8.t t/zvg_15array.t t/zvg_16destroy.t t/zvg_19fhtrace.t t/zvg_20meta.t t/zvg_30subclass.t t/zvg_31methcache.t t/zvg_35thrclone.t t/zvg_40profile.t t/zvg_41prof_dump.t t/zvg_42prof_data.t t/zvg_43prof_env.t t/zvg_48dbi_dbd_sqlengine.t t/zvg_49dbd_file.t t/zvg_50dbm_simple.t t/zvg_51dbm_file.t t/zvg_52dbm_complex.t t/zvg_60preparse.t t/zvg_65transact.t t/zvg_70callbacks.t t/zvg_72childhandles.t t/zvg_80proxy.t t/zvg_85gofer.t t/zvg_86gofer_fail.t t/zvg_87gofer_cache.t t/zvg_90sql_type_cast.t Creating test wrappers for DBI::SQL::Nano: t/zvn_48dbi_dbd_sqlengine.t t/zvn_49dbd_file.t t/zvn_50dbm_simple.t t/zvn_51dbm_file.t t/zvn_52dbm_complex.t t/zvn_85gofer.t Creating test wrappers for DBI::PurePerl: t/zvp_01basics.t t/zvp_02dbidrv.t t/zvp_03handle.t t/zvp_04mods.t t/zvp_05concathash.t t/zvp_06attrs.t t/zvp_07kids.t t/zvp_08keeperr.t t/zvp_09trace.t t/zvp_10examp.t t/zvp_11fetch.t t/zvp_12quote.t t/zvp_13taint.t t/zvp_14utf8.t t/zvp_15array.t t/zvp_16destroy.t t/zvp_19fhtrace.t t/zvp_20meta.t t/zvp_30subclass.t t/zvp_31methcache.t t/zvp_35thrclone.t t/zvp_40profile.t t/zvp_41prof_dump.t t/zvp_42prof_data.t t/zvp_43prof_env.t t/zvp_48dbi_dbd_sqlengine.t t/zvp_49dbd_file.t t/zvp_50dbm_simple.t t/zvp_51dbm_file.t t/zvp_52dbm_complex.t t/zvp_60preparse.t t/zvp_65transact.t t/zvp_70callbacks.t t/zvp_72childhandles.t t/zvp_80proxy.t t/zvp_85gofer.t t/zvp_86gofer_fail.t t/zvp_87gofer_cache.t t/zvp_90sql_type_cast.t Creating test wrappers for DBD::Gofer + DBI::SQL::Nano: t/zvxgn_48dbi_dbd_sqlengine.t t/zvxgn_49dbd_file.t t/zvxgn_50dbm_simple.t t/zvxgn_51dbm_file.t t/zvxgn_52dbm_complex.t t/zvxgn_85gofer.t Creating test wrappers for DBD::Gofer + DBI::PurePerl: t/zvxgp_01basics.t t/zvxgp_02dbidrv.t t/zvxgp_03handle.t t/zvxgp_04mods.t t/zvxgp_05concathash.t t/zvxgp_06attrs.t t/zvxgp_07kids.t t/zvxgp_08keeperr.t t/zvxgp_09trace.t t/zvxgp_10examp.t t/zvxgp_11fetch.t t/zvxgp_12quote.t t/zvxgp_13taint.t t/zvxgp_14utf8.t t/zvxgp_15array.t t/zvxgp_16destroy.t t/zvxgp_19fhtrace.t t/zvxgp_20meta.t t/zvxgp_30subclass.t t/zvxgp_31methcache.t t/zvxgp_35thrclone.t t/zvxgp_40profile.t t/zvxgp_41prof_dump.t t/zvxgp_42prof_data.t t/zvxgp_43prof_env.t t/zvxgp_48dbi_dbd_sqlengine.t t/zvxgp_49dbd_file.t t/zvxgp_50dbm_simple.t t/zvxgp_51dbm_file.t t/zvxgp_52dbm_complex.t t/zvxgp_60preparse.t t/zvxgp_65transact.t t/zvxgp_70callbacks.t t/zvxgp_72childhandles.t t/zvxgp_80proxy.t t/zvxgp_85gofer.t t/zvxgp_86gofer_fail.t t/zvxgp_87gofer_cache.t t/zvxgp_90sql_type_cast.t Creating test wrappers for DBI::SQL::Nano + DBI::PurePerl: t/zvxnp_48dbi_dbd_sqlengine.t t/zvxnp_49dbd_file.t t/zvxnp_50dbm_simple.t t/zvxnp_51dbm_file.t t/zvxnp_52dbm_complex.t t/zvxnp_85gofer.t Creating test wrappers for DBD::Gofer + DBI::SQL::Nano + DBI::PurePerl: t/zvxgnp_48dbi_dbd_sqlengine.t t/zvxgnp_49dbd_file.t t/zvxgnp_50dbm_simple.t t/zvxgnp_51dbm_file.t t/zvxgnp_52dbm_complex.t t/zvxgnp_85gofer.t Checking if your kit is complete... Looks good Have /usr/perl5/5.12/lib/Sun/Solaris/PerlGcc Want /usr/perl5/5.12/lib/i86pc-solaris-64int Your perl and your Config.pm seem to have different ideas about the architecture they are running on. Perl thinks: [PerlGcc] Config says: [i86pc-solaris-64int] This may or may not cause problems. Please check your installation of perl if you have problems building this extension. I see you're using perl 5.012003 on i86pc-solaris-64int, okay. Remember to actually *read* the README file! Use 'make' to build the software (dmake or nmake on Windows). Then 'make test' to execute self tests. Then 'make install' to install the DBI and then delete this working directory before unpacking and building any DBD::* drivers. Writing Makefile for DBI Writing MYMETA.yml and MYMETA.json /usr/perl5/5.12/bin/perl -MExtUtils::Command -e 'mkpath' -- blib/lib/DBI rm -f blib/lib/DBI/Changes.pm cp Changes blib/lib/DBI/Changes.pm cp Driver_xst.h blib/arch/auto/DBI/Driver_xst.h cp lib/DBI/Gofer/Response.pm blib/lib/DBI/Gofer/Response.pm cp lib/DBD/Proxy.pm blib/lib/DBD/Proxy.pm cp lib/DBI/Util/_accessor.pm blib/lib/DBI/Util/_accessor.pm cp lib/DBI/Gofer/Transport/Base.pm blib/lib/DBI/Gofer/Transport/Base.pm cp lib/DBD/DBM.pm blib/lib/DBD/DBM.pm cp DBIXS.h blib/arch/auto/DBI/DBIXS.h cp dbixs_rev.pl blib/lib/dbixs_rev.pl cp lib/DBI/Const/GetInfoType.pm blib/lib/DBI/Const/GetInfoType.pm cp lib/DBI/Gofer/Serializer/DataDumper.pm blib/lib/DBI/Gofer/Serializer/DataDumper.pm cp lib/DBI/DBD/Metadata.pm blib/lib/DBI/DBD/Metadata.pm cp lib/DBI/Const/GetInfo/ODBC.pm blib/lib/DBI/Const/GetInfo/ODBC.pm cp lib/DBD/Gofer/Transport/pipeone.pm blib/lib/DBD/Gofer/Transport/pipeone.pm cp lib/DBI/ProfileDumper/Apache.pm blib/lib/DBI/ProfileDumper/Apache.pm cp lib/DBD/File.pm blib/lib/DBD/File.pm cp Driver.xst blib/arch/auto/DBI/Driver.xst cp lib/DBD/File/Roadmap.pod blib/lib/DBD/File/Roadmap.pod cp lib/DBI/Util/CacheMemory.pm blib/lib/DBI/Util/CacheMemory.pm cp lib/DBI/ProfileSubs.pm blib/lib/DBI/ProfileSubs.pm cp lib/DBD/NullP.pm blib/lib/DBD/NullP.pm cp dbi_sql.h blib/arch/auto/DBI/dbi_sql.h cp lib/DBD/Gofer.pm blib/lib/DBD/Gofer.pm cp lib/DBD/File/HowTo.pod blib/lib/DBD/File/HowTo.pod cp dbd_xsh.h blib/arch/auto/DBI/dbd_xsh.h cp dbivport.h blib/arch/auto/DBI/dbivport.h cp lib/DBI/DBD/SqlEngine/HowTo.pod blib/lib/DBI/DBD/SqlEngine/HowTo.pod cp dbixs_rev.h blib/arch/auto/DBI/dbixs_rev.h cp lib/DBD/Gofer/Transport/corostream.pm blib/lib/DBD/Gofer/Transport/corostream.pm cp lib/DBD/Gofer/Transport/Base.pm blib/lib/DBD/Gofer/Transport/Base.pm cp lib/DBI/FAQ.pm blib/lib/DBI/FAQ.pm cp lib/DBD/Gofer/Policy/rush.pm blib/lib/DBD/Gofer/Policy/rush.pm cp lib/DBI/SQL/Nano.pm blib/lib/DBI/SQL/Nano.pm cp lib/DBI/Gofer/Request.pm blib/lib/DBI/Gofer/Request.pm cp lib/DBI/Const/GetInfo/ANSI.pm blib/lib/DBI/Const/GetInfo/ANSI.pm cp lib/DBD/Gofer/Transport/stream.pm blib/lib/DBD/Gofer/Transport/stream.pm cp lib/DBD/Gofer/Policy/classic.pm blib/lib/DBD/Gofer/Policy/classic.pm cp lib/DBI/Gofer/Transport/stream.pm blib/lib/DBI/Gofer/Transport/stream.pm cp lib/DBI/Const/GetInfoReturn.pm blib/lib/DBI/Const/GetInfoReturn.pm cp DBI.pm blib/lib/DBI.pm cp lib/DBI/Gofer/Serializer/Storable.pm blib/lib/DBI/Gofer/Serializer/Storable.pm cp lib/DBD/Gofer/Policy/Base.pm blib/lib/DBD/Gofer/Policy/Base.pm cp lib/DBD/Sponge.pm blib/lib/DBD/Sponge.pm cp lib/DBD/Gofer/Policy/pedantic.pm blib/lib/DBD/Gofer/Policy/pedantic.pm cp lib/DBI/Gofer/Transport/pipeone.pm blib/lib/DBI/Gofer/Transport/pipeone.pm cp lib/DBI/DBD/SqlEngine/Developers.pod blib/lib/DBI/DBD/SqlEngine/Developers.pod cp lib/DBI/W32ODBC.pm blib/lib/DBI/W32ODBC.pm cp lib/DBD/Gofer/Transport/null.pm blib/lib/DBD/Gofer/Transport/null.pm cp lib/Bundle/DBI.pm blib/lib/Bundle/DBI.pm cp lib/DBD/File/Developers.pod blib/lib/DBD/File/Developers.pod cp lib/DBI/Profile.pm blib/lib/DBI/Profile.pm cp lib/DBI/ProfileDumper.pm blib/lib/DBI/ProfileDumper.pm cp lib/DBI/Gofer/Serializer/Base.pm blib/lib/DBI/Gofer/Serializer/Base.pm cp lib/DBI/ProxyServer.pm blib/lib/DBI/ProxyServer.pm cp dbipport.h blib/arch/auto/DBI/dbipport.h cp lib/DBI/Gofer/Execute.pm blib/lib/DBI/Gofer/Execute.pm cp lib/DBI/DBD.pm blib/lib/DBI/DBD.pm cp lib/Win32/DBIODBC.pm blib/lib/Win32/DBIODBC.pm cp lib/DBI/DBD/SqlEngine.pm blib/lib/DBI/DBD/SqlEngine.pm cp lib/DBI/PurePerl.pm blib/lib/DBI/PurePerl.pm cp lib/DBD/ExampleP.pm blib/lib/DBD/ExampleP.pm cp lib/DBI/ProfileData.pm blib/lib/DBI/ProfileData.pm /usr/perl5/5.12/bin/perl -p -e "s/~DRIVER~/Perl/g" ./Driver.xst > Perl.xsi /usr/perl5/5.12/bin/perl /usr/perl5/5.12/lib/ExtUtils/xsubpp -typemap /usr/perl5/5.12/lib/ExtUtils/typemap -typemap typemap Perl.xs > Perl.xsc && mv Perl.xsc Perl.c gcc -c -DPTR_IS_LONG -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -DPERL_USE_SAFE_PUTENV -xO4 -DVERSION=\"1.621\" -DXS_VERSION=\"1.621\" -KPIC "-I/usr/perl5/5.12/lib/i86pc-solaris-64int/CORE" -DDBI_NO_THREADS Perl.c gcc: unrecognized option '-KPIC' gcc: language O4 not recognized gcc: language O4 not recognized gcc: Perl.c: linker input file unused because linking not done /usr/perl5/5.12/bin/perl /usr/perl5/5.12/lib/ExtUtils/xsubpp -typemap /usr/perl5/5.12/lib/ExtUtils/typemap -typemap typemap DBI.xs > DBI.xsc && mv DBI.xsc DBI.c gcc -c -DPTR_IS_LONG -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -DPERL_USE_SAFE_PUTENV -xO4 -DVERSION=\"1.621\" -DXS_VERSION=\"1.621\" -KPIC "-I/usr/perl5/5.12/lib/i86pc-solaris-64int/CORE" -DDBI_NO_THREADS DBI.c gcc: unrecognized option '-KPIC' gcc: language O4 not recognized gcc: language O4 not recognized gcc: DBI.c: linker input file unused because linking not done Running Mkbootstrap for DBI () chmod 644 DBI.bs rm -f blib/arch/auto/DBI/DBI.so cc -G -L/usr/lib -L/usr/ccs/lib -L/lib -L/usr/gnu/lib DBI.o -o blib/arch/auto/DBI/DBI.so \ \ gmake: cc: Command not found gmake: *** [blib/arch/auto/DBI/DBI.so] Error 127 TIMB/DBI-1.621.tar.gz /usr/sfw/bin/gmake -- NOT OK Running make test Can't test without successful make Running make install Make had returned bad status, install seems impossible Failed during this command: TIMB/DBI-1.621.tar.gz : make NO </code></pre> Sorry I took so long to edit this and put up the error, got a little busy along the way. Anyone have any ideas what this gigantic error means? I figure it's something related to the compiler, just not sure what. NEW EDIT So after I found the workaround, it went through the installation process (which took surprisingly long) and finally came out with this... <pre><code>Test Summary Report ------------------- ../cpan/CGI/t/tmpdir.t (Wstat: 0 Tests: 9 Failed: 0) TODO passed: 3, 6, 8 ../cpan/Socket/t/getnameinfo.t (Wstat: 256 Tests: 14 Failed: 1) Failed test: 10 Non-zero exit status: 1 Files=2334, Tests=522101, 1212 wallclock secs (90.50 usr 58.34 sys + 533.70 cusr 288.26 csys = 970.80 CPU) Result: FAIL *** Error code 1 make: Fatal error: Command failed for target `test_harness' Installed /home/oracle/perl5/perlbrew/build/perl-5.16.0 as perl-5.16.0 successfully. Run the following command to switch to it. perlbrew switch perl-5.16.0 </code></pre> Just based on that, I went ahead and did <code>/home/oracle/perl5/perlbrew/bin/perlbrew switch perl-5.16.0</code> but it returned, <code>perl-5.16.0 is not installed</code> :/ I just went ahead and tried to look for an instance of perl-5.16.0 and did... <pre><code>root@dr-solaris11:~/perl5/perlbrew/build# cd /home/oracle/perl5/perlbrew/build/perl-5.16.0 root@dr-solaris11:~/perl5/perlbrew/build/perl-5.16.0# ls Artistic MANIFEST README.cn AUTHORS mathoms.c README.cygwin autodoc.pl mathoms.o README.dgux av.c META.yml README.dos av.h metaconfig.h README.epoc av.o metaconfig.SH README.freebsd beos mg_data.h README.haiku bitcount.h mg_names.c README.hpux cflags mg_raw.h README.hurd cflags.SH mg_vtable.h README.irix Changes mg.c README.jp charclass_invlists.h mg.h README.ko config_h.SH mg.o README.linux config.h minimod.pl README.macos config.over miniperl README.macosx config.sh miniperlmain.c README.micro configpm miniperlmain.o README.mpeix Configure mkppport README.netware configure.com mkppport.lst README.openbsd configure.gnu mpeix README.os2 cop.h mro.c README.os390 Copying mro.o README.os400 cpan myconfig README.plan9 Cross myconfig.SH README.qnx cv.h mydtrace.h README.riscos cygwin NetWare README.solaris deb.c nostdio.h README.symbian deb.o numeric.c README.tru64 dist numeric.o README.tw djgpp op_reg_common.h README.uts doio.c op.c README.vmesa doio.o op.h README.vms doop.c op.o README.vos doop.o opcode.h README.win32 dosish.h opmini.c realclean.sh dquote_static.c opmini.o reentr.c dump.c opnames.h reentr.h dump.o os2 reentr.o DynaLoader.o overload.c regcharclass.h embed.fnc overload.h regcomp.c embed.h pad.c regcomp.h embedvar.h pad.h regcomp.o epoc pad.o regcomp.sym ext parser.h regen ext.libs patchlevel.h regen_perly.pl EXTERN.h perl regen.pl extra.pods perl.c regexec.c fakesdio.h perl.h regexec.o fakethr.h perl.o regexp.h feature.h perlapi.c regnodes.h form.h perlapi.h run.c generate_uudmap perlapi.o run.o generate_uudmap.c perldtrace.d runtests generate_uudmap.o perlio.c runtests.SH genpacksizetables.pl perlio.h scope.c git_version.h perlio.o scope.h globals.c perlio.sym scope.o globals.o perliol.h sv.c globvar.sym perlmain.c sv.h gv.c perlmain.o sv.o gv.h perlmini.c symbian gv.o perlmini.o t h2pl perlsdio.h taint.c haiku perlsfio.h taint.o handy.h perlsh TestInit.pm hints perlvars.h thread.h hv.c perly.act time64_config.h hv.h perly.c time64.c hv.o perly.h time64.h INSTALL perly.o toke.c install_lib.pl perly.tab toke.o installhtml perly.y uconfig.h installman plan9 uconfig.sh installperl pod uconfig64.sh INTERN.h Policy_sh.SH universal.c intrpvar.h Policy.sh universal.o iperlsys.h Porting unixish.h keywords.c pp_ctl.c utf8.c keywords.h pp_ctl.o utf8.h keywords.o pp_hot.c utf8.o l1_char_class_tab.h pp_hot.o utfebcdic.h lib pp_pack.c util.c libperl.a pp_pack.o util.h locale.c pp_proto.h util.o locale.o pp_sort.c utils mad pp_sort.o utils.lst madly.c pp_sys.c uts make_ext.pl pp_sys.o uudmap.h make_patchnum.pl pp.c veryclean.sh makedef.pl pp.h vmesa makedepend pp.o vms makedepend.SH proto.h vos makefile qnx warnings.h Makefile README win32 Makefile.micro README.aix write_buildcustomize.pl makefile.old README.amiga x2p Makefile.SH README.beos XSUB.h malloc_ctl.h README.bs2000 malloc.c README.ce </code></pre> Then I tried, <code>/home/oracle/perl5/perlbrew/bin/perlbrew switch /home/oracle/perl5/perlbrew/build/perl-5.16.0</code> and I still got: <code>/home/oracle/perl5/perlbrew/build/perl-5.16.0 is not installed</code> :/
Tags
<perl><oracle><solaris><dbi><dbd>
Title
Installing CGI, DBI and DBD::Oracle with Solaris 11 64-bit
singulars
PostAcceptedAnswerId
1. PO
 singulars
 PostTypePostTypeId
 PTAnswer
PostParentId
1. This table or related slice is empty.
PostTypePostTypeId
1. PTQuestion
UserLastEditorUserId
1. USThis 0ne Pr0grammer
UserOwnerUserId
1. USThis 0ne Pr0grammer
plurals
PostLinksPostIdRelatedPostId
1. This table or related slice is empty.
PostLinksRelatedPostIdPostId
1. This table or related slice is empty.
PostsAcceptedAnswerId
1. This table or related slice is empty.
PostsParentIdCreationDate
1. PO
 singulars
 PostTypePostTypeId
 PTAnswer
2. PO
 singulars
 PostTypePostTypeId
 PTAnswer
3. PO
 singulars
 PostTypePostTypeId
 PTAnswer
VotesPostIdCreationDate
1. VO
 singulars
 PostPostId
 POInstalling CGI, DBI and DBD::Oracle with Solaris 11 64-bit
 UserUserId
 USThis 0ne Pr0grammer
 VoteTypeVoteTypeId
 VTBountyStart
2. VO
 singulars
 PostPostId
 POInstalling CGI, DBI and DBD::Oracle with Solaris 11 64-bit
 UserUserId
 This table or related slice is empty.
 VoteTypeVoteTypeId
 VTUpMod
3. VO
 singulars
 PostPostId
 POInstalling CGI, DBI and DBD::Oracle with Solaris 11 64-bit
 UserUserId
 USDavid Wadge
 VoteTypeVoteTypeId
 VTFavorite
CommentsPostId

Querying!

Guidance

A row detail

Detail views are divided into sections. All the information in the data section comes from columns in the selected row. The other sections display data from other, related rows.

Related data can be related in a to-one or a to-many fashion. Captions of data related in a to-many fashion link to a list view showing a filtered view of the table.

Try moving around until you find a non-empty to-many entry and click on the label to get to one. You can move back to the root by clicking on the database name in the header.