StackOverflow2013

Note that there are some explanatory texts on larger screens.

plurals

PO
text
Body
copied!<p>Modern hardware like you're describing has a program stored in ROM and an all-purpose microcomputer (CPU) executing that program.</p> <p>The CPU reads information from ROM by setting up addresses on its address bus and then asking the ROM to tell it the value stored at that location. There's something like a read pulse being raised (on a separate line) to tell the ROM to make the value accessible on the lines of the data bus. That, in a nutshell, is reading.</p> <p>To get the hardware to do something, the CPU basically executes a kind of write operation. It puts a value, which is just a bunch of bits if you want to look at it that way, on the address bus to select a certain device and perhaps function on that device, then it raises another signal line saying "write!" The device that recognizes its address on the address bus responds to that signal by accepting the data from the data bus and then performing whatever its function is. Typically, one of the data bus bits will be connected within the output device to a power output stage, i.e. a transistor stronger than the ones used just for computation, and that transistor will connect some electrical device to current sufficient to make it move/glow/whatever.</p> <p>Tiny, cheap devices are coded in assembly language to save costs for ROM; in industrial quantities, even small amounts of memory can affect price. The assembly language is specific to the CPU; some chips called "8051", "6502" and "Atmel (something or other)" are popular. Bigger devices with more complex requirements may have their firmware written in C or a C-like dialect, which makes programming a little easier than assembler. The bigges ones even run C++ code. Compiled, of course.</p>

Querying!

Guidance

An individual column

Larger individual text columns get their own page to allow for proper reading.

SQuiL has stopped working due to an internal error.

If you are curious you may find further information in the browser console, which is accessible through the devtools (F12).

Reload