StackOverflow2013

Note that there are some explanatory texts on larger screens.

plurals

POerror while loading shared libraries: libstdc++.so ------ confused ..?
text
Body
copied!<p>I have build my toolchain using following link it have , crosscompiler c++ support enabled :----- <a href="http://www.bootc.net/archives/2012/05/26/how-to-build-a-cross-compiler-for-your-raspberry-pi/" rel="nofollow">http://www.bootc.net/archives/2012/05/26/how-to-build-a-cross-compiler-for-your-raspberry-pi/</a></p> <p>I am using Scratchbox & Qemu.</p> <p>Now i am compiling my code in Scratchbox2, c++ code is compiling but not able to run it throws this error :-------</p> <pre><code>./a.out: error while loading shared libraries: libstdc++.so </code></pre> <p>Compiler version :------------------</p> <pre><code>[SB2 simple armhf] ignite@ignite testing $ g++ --version arm-unknown-linux-gnueabi-g++ (crosstool-NG 1.17.0) 4.7.3 20121001 (prerelease) Copyright (C) 2012 Free Software Foundation, Inc. This is free software; see the source for copying conditions. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. </code></pre> <p>compiling successful :---------------</p> <blockquote> <p>[SB2 simple armhf] ignite@ignite testing $ g++ new.cpp</p> </blockquote> <p>output file format :----------------</p> <pre><code>[SB2 simple armhf] ignite@ignite testing $ file a.out a.out: ELF 32-bit LSB executable, ARM, version 1 (SYSV), dynamically linked (uses shared libs), for GNU/Linux 3.6.3, not stripped </code></pre> <p>Error thrown :---------</p> <pre><code>[SB2 simple armhf] ignite@ignite testing $ ./a.out ./a.out: error while loading shared libraries: libstdc++.so.6: cannot open shared object file: No such file or directory </code></pre> <p>When i run this command :--------- >>> whereis libstdc++.so it shows the library</p> <pre><code>[SB2 simple armhf] ignite@ignite testing $ whereis libstdc++.so libstdc++: [SB2 simple armhf] ignite@ignite testing $ </code></pre> <p>Even i run ldconfig -v same error is there :-----</p> <pre><code>[SB2 simple armhf] ignite@ignite testing $ ldconfig -v /home/ignite/sbox2/rootfs/armhf/sbin/ldconfig: Can't open configuration file /home/ignite/sbox2/rootfs/armhf/etc/ld.so.conf: No such file or directory /lib/arm-linux-gnueabihf: libpcprofile.so -> libpcprofile.so libcrypt.so.1 -> libcrypt-2.13.so libdl.so.2 -> libdl-2.13.so libSegFault.so -> libSegFault.so libmount.so.1 -> libmount.so.1.1.0 libnsl.so.1 -> libnsl-2.13.so libncurses.so.5 -> libncurses.so.5.9 libmemusage.so -> libmemusage.so libpamc.so.0 -> libpamc.so.0.82.1 libz.so.1 -> libz.so.1.2.7 libuuid.so.1 -> libuuid.so.1.3.0 libattr.so.1 -> libattr.so.1.1.0 libresolv.so.2 -> libresolv-2.13.so libncursesw.so.5 -> libncursesw.so.5.9 libprocps.so.0 -> libprocps.so.0.0.1 libcom_err.so.2 -> libcom_err.so.2.1 libsepol.so.1 -> libsepol.so.1 libbz2.so.1.0 -> libbz2.so.1.0.4 libnss_files.so.2 -> libnss_files-2.13.so libpthread.so.0 -> libpthread-2.13.so libss.so.2 -> libss.so.2.0 libdbus-1.so.3 -> libdbus-1.so.3.7.2 libacl.so.1 -> libacl.so.1.1.0 libpam.so.0 -> libpam.so.0.83.0 libBrokenLocale.so.1 -> libBrokenLocale-2.13.so liblzma.so.5 -> liblzma.so.5.0.0 librt.so.1 -> librt-2.13.so libudev.so.0 -> libudev.so.0.13.0 libgcc_s.so.1 -> libgcc_s.so.1 libanl.so.1 -> libanl-2.13.so libm.so.6 -> libm-2.13.so libnss_hesiod.so.2 -> libnss_hesiod-2.13.so libselinux.so.1 -> libselinux.so.1 libpam_misc.so.0 -> libpam_misc.so.0.82.0 libext2fs.so.2 -> libext2fs.so.2.4 libnss_nisplus.so.2 -> libnss_nisplus-2.13.so libkmod.so.2 -> libkmod.so.2.1.3 ld-linux-armhf.so.3 -> ld-2.13.so libply-splash-core.so.2 -> libply-splash-core.so.2.1.0 libnss_compat.so.2 -> libnss_compat-2.13.so libslang.so.2 -> libslang.so.2.2.4 libtinfo.so.5 -> libtinfo.so.5.9 libnss_nis.so.2 -> libnss_nis-2.13.so libnss_dns.so.2 -> libnss_dns-2.13.so libc.so.6 -> libc-2.13.so libblkid.so.1 -> libblkid.so.1.1.0 libutil.so.1 -> libutil-2.13.so libthread_db.so.1 -> libthread_db-1.0.so libcidn.so.1 -> libcidn-2.13.so libe2p.so.2 -> libe2p.so.2.3 libply.so.2 -> libply.so.2.1.0 /usr/lib/arm-linux-gnueabihf: libpanel.so.5 -> libpanel.so.5.9 libformw.so.5 -> libformw.so.5.9 libsemanage.so.1 -> libsemanage.so.1 libtic.so.5 -> libtic.so.5.9 libustr-1.0.so.1 -> libustr-1.0.so.1.0.4 libmenu.so.5 -> libmenu.so.5.9 libmenuw.so.5 -> libmenuw.so.5.9 libply-boot-client.so.2 -> libply-boot-client.so.2.1.0 libdb-5.1.so -> libdb-5.1.so libform.so.5 -> libform.so.5.9 libpanelw.so.5 -> libpanelw.so.5.9 /lib: libnih-dbus.so.1 -> libnih-dbus.so.1.0.0 libnih.so.1 -> libnih.so.1.0.0 /usr/lib: libperl.so.5.14 -> libperl.so.5.14.2 [SB2 simple armhf] ignite@ignite testing $ g++ new.cpp [SB2 simple armhf] ignite@ignite testing $ ./a.out ./a.out: error while loading shared libraries: libstdc++.so.6: cannot open shared object file: No such file or directory [SB2 simple armhf] ignite@ignite testing $ </code></pre> <p>Please suggest what to do .... ?</p> <p>Any suggestion why this error is. Please suggest.</p> <p>Crosscompiler configuration file :-----<br> <a href="http://www.bootc.net/archives/2012/05/26/how-to-build-a-cross-compiler-for-your-raspberry-pi/" rel="nofollow">http://www.bootc.net/archives/2012/05/26/how-to-build-a-cross-compiler-for-your-raspberry-pi/</a> </p> <pre><code># # Automatically generated make config: don't edit # crosstool-NG 1.17.0 Configuration # Mon Feb 4 10:09:28 2013 # CT_CONFIGURE_has_xz=y CT_MODULES=y # # Paths and misc options # # # crosstool-NG behavior # # CT_OBSOLETE is not set CT_EXPERIMENTAL=y # CT_DEBUG_CT is not set # # Paths # CT_LOCAL_TARBALLS_DIR="" CT_CUSTOM_LOCATION_ROOT_DIR="" CT_WORK_DIR="${CT_TOP_DIR}/.build" CT_PREFIX_DIR="/opt/cross/x-tools_4_13_libc/${CT_TARGET}" CT_INSTALL_DIR="${CT_PREFIX_DIR}" CT_RM_RF_PREFIX_DIR=y CT_REMOVE_DOCS=y CT_INSTALL_DIR_RO=y CT_STRIP_ALL_TOOLCHAIN_EXECUTABLES=y # # Downloading # # CT_FORBID_DOWNLOAD is not set # CT_FORCE_DOWNLOAD is not set CT_CONNECT_TIMEOUT=10 # CT_ONLY_DOWNLOAD is not set # CT_USE_MIRROR is not set # # Extracting # # CT_FORCE_EXTRACT is not set CT_OVERIDE_CONFIG_GUESS_SUB=y # CT_ONLY_EXTRACT is not set CT_PATCH_BUNDLED=y # CT_PATCH_LOCAL is not set # CT_PATCH_BUNDLED_LOCAL is not set # CT_PATCH_LOCAL_BUNDLED is not set # CT_PATCH_BUNDLED_FALLBACK_LOCAL is not set # CT_PATCH_LOCAL_FALLBACK_BUNDLED is not set # CT_PATCH_NONE is not set CT_PATCH_ORDER="bundled" # # Build behavior # CT_PARALLEL_JOBS=0 CT_LOAD=0 CT_USE_PIPES=y CT_EXTRA_FLAGS_FOR_HOST="" # CT_CONFIG_SHELL_SH is not set # CT_CONFIG_SHELL_ASH is not set CT_CONFIG_SHELL_BASH=y # CT_CONFIG_SHELL_CUSTOM is not set CT_CONFIG_SHELL="${bash}" # # Logging # # CT_LOG_ERROR is not set # CT_LOG_WARN is not set CT_LOG_INFO=y # CT_LOG_EXTRA is not set # CT_LOG_ALL is not set # CT_LOG_DEBUG is not set CT_LOG_LEVEL_MAX="INFO" # CT_LOG_SEE_TOOLS_WARN is not set CT_LOG_PROGRESS_BAR=y CT_LOG_TO_FILE=y CT_LOG_FILE_COMPRESS=y # # Target options # CT_ARCH="arm" CT_ARCH_SUPPORTS_BOTH_MMU=y CT_ARCH_SUPPORTS_BOTH_ENDIAN=y CT_ARCH_SUPPORTS_32=y CT_ARCH_SUPPORTS_WITH_ARCH=y CT_ARCH_SUPPORTS_WITH_CPU=y CT_ARCH_SUPPORTS_WITH_TUNE=y CT_ARCH_SUPPORTS_WITH_FLOAT=y CT_ARCH_SUPPORTS_WITH_FPU=y CT_ARCH_SUPPORTS_SOFTFP=y CT_ARCH_DEFAULT_HAS_MMU=y CT_ARCH_DEFAULT_LE=y CT_ARCH_DEFAULT_32=y CT_ARCH_ARCH="armv6zk" CT_ARCH_CPU="arm1176jzf-s" CT_ARCH_TUNE="arm1176jzf-s" CT_ARCH_FPU="vfp" # CT_ARCH_BE is not set CT_ARCH_LE=y CT_ARCH_32=y CT_ARCH_BITNESS=32 CT_ARCH_FLOAT_HW=y # CT_ARCH_FLOAT_SW is not set CT_TARGET_CFLAGS="" CT_TARGET_LDFLAGS="" # CT_ARCH_alpha is not set CT_ARCH_arm=y # CT_ARCH_avr32 is not set # CT_ARCH_blackfin is not set # CT_ARCH_m68k is not set # CT_ARCH_microblaze is not set # CT_ARCH_mips is not set # CT_ARCH_powerpc is not set # CT_ARCH_s390 is not set # CT_ARCH_sh is not set # CT_ARCH_sparc is not set # CT_ARCH_x86 is not set CT_ARCH_alpha_AVAILABLE=y CT_ARCH_arm_AVAILABLE=y CT_ARCH_avr32_AVAILABLE=y CT_ARCH_blackfin_AVAILABLE=y CT_ARCH_m68k_AVAILABLE=y CT_ARCH_microblaze_AVAILABLE=y CT_ARCH_mips_AVAILABLE=y CT_ARCH_powerpc_AVAILABLE=y CT_ARCH_s390_AVAILABLE=y CT_ARCH_sh_AVAILABLE=y CT_ARCH_sparc_AVAILABLE=y CT_ARCH_x86_AVAILABLE=y # # Generic target options # # CT_MULTILIB is not set CT_ARCH_USE_MMU=y CT_ARCH_ENDIAN="little" # # Target optimisations # # CT_ARCH_FLOAT_SOFTFP is not set CT_ARCH_FLOAT="hard" # # arm other options # CT_ARCH_ARM_MODE="arm" CT_ARCH_ARM_MODE_ARM=y # CT_ARCH_ARM_MODE_THUMB is not set # CT_ARCH_ARM_INTERWORKING is not set CT_ARCH_ARM_EABI=y # # Toolchain options # # # General toolchain options # CT_FORCE_SYSROOT=y CT_USE_SYSROOT=y CT_SYSROOT_NAME="sysroot" CT_SYSROOT_DIR_PREFIX="" CT_WANTS_STATIC_LINK=y # CT_STATIC_TOOLCHAIN is not set CT_TOOLCHAIN_PKGVERSION="" CT_TOOLCHAIN_BUGURL="" # # Tuple completion and aliasing # CT_TARGET_VENDOR="unknown" CT_TARGET_ALIAS_SED_EXPR="" CT_TARGET_ALIAS="" # # Toolchain type # # CT_NATIVE is not set CT_CROSS=y # CT_CROSS_NATIVE is not set # CT_CANADIAN is not set CT_TOOLCHAIN_TYPE="cross" # # Build system # CT_BUILD="" CT_BUILD_PREFIX="" CT_BUILD_SUFFIX="" # # Misc options # # CT_TOOLCHAIN_ENABLE_NLS is not set # # Operating System # CT_KERNEL_SUPPORTS_SHARED_LIBS=y CT_KERNEL="linux" CT_KERNEL_VERSION="3.6.3" # CT_KERNEL_bare_metal is not set CT_KERNEL_linux=y CT_KERNEL_bare_metal_AVAILABLE=y CT_KERNEL_linux_AVAILABLE=y CT_KERNEL_V_3_6_3=y # CT_KERNEL_V_3_6_2 is not set # CT_KERNEL_V_3_6_1 is not set # CT_KERNEL_V_3_6 is not set # CT_KERNEL_V_3_5_7 is not set # CT_KERNEL_V_3_4_15 is not set # CT_KERNEL_V_3_3_8 is not set # CT_KERNEL_V_3_2_32 is not set # CT_KERNEL_V_3_1_10 is not set # CT_KERNEL_V_3_0_48 is not set # CT_KERNEL_V_2_6_39_4 is not set # CT_KERNEL_V_2_6_38_8 is not set # CT_KERNEL_V_2_6_37_6 is not set # CT_KERNEL_V_2_6_36_4 is not set # CT_KERNEL_V_2_6_33_20 is not set # CT_KERNEL_V_2_6_32_60 is not set # CT_KERNEL_V_2_6_31_14 is not set # CT_KERNEL_V_2_6_27_62 is not set # CT_KERNEL_LINUX_CUSTOM is not set CT_KERNEL_mingw32_AVAILABLE=y # # Common kernel options # CT_SHARED_LIBS=y # # linux other options # CT_KERNEL_LINUX_VERBOSITY_0=y # CT_KERNEL_LINUX_VERBOSITY_1 is not set # CT_KERNEL_LINUX_VERBOSITY_2 is not set CT_KERNEL_LINUX_VERBOSE_LEVEL=0 CT_KERNEL_LINUX_INSTALL_CHECK=y # # Binary utilities # CT_ARCH_BINFMT_ELF=y # # GNU binutils # # CT_BINUTILS_V_2_22 is not set # CT_BINUTILS_V_2_21_53 is not set CT_BINUTILS_V_2_21_1a=y # CT_BINUTILS_V_2_20_1a is not set # CT_BINUTILS_V_2_19_1a is not set # CT_BINUTILS_V_2_18a is not set # CT_BINUTILS_CUSTOM is not set CT_BINUTILS_VERSION="2.21.1a" CT_BINUTILS_2_21_or_later=y CT_BINUTILS_2_20_or_later=y CT_BINUTILS_2_19_or_later=y CT_BINUTILS_2_18_or_later=y CT_BINUTILS_HAS_HASH_STYLE=y CT_BINUTILS_HAS_GOLD=y CT_BINUTILS_GOLD_SUPPORTS_ARCH=y CT_BINUTILS_HAS_PLUGINS=y CT_BINUTILS_HAS_PKGVERSION_BUGURL=y CT_BINUTILS_FORCE_LD_BFD=y CT_BINUTILS_LINKER_LD=y # CT_BINUTILS_LINKER_LD_GOLD is not set # CT_BINUTILS_LINKER_GOLD_LD is not set CT_BINUTILS_LINKERS_LIST="ld" CT_BINUTILS_LINKER_DEFAULT="bfd" # CT_BINUTILS_PLUGINS is not set CT_BINUTILS_EXTRA_CONFIG_ARRAY="" # CT_BINUTILS_FOR_TARGET is not set # # C compiler # CT_CC="gcc" CT_CC_VERSION="linaro-4.7-2012.10" CT_CC_gcc=y CT_CC_GCC_SHOW_LINARO=y CT_CC_V_linaro_4_7_2012_10=y # CT_CC_V_4_7_2 is not set # CT_CC_V_4_7_1 is not set # CT_CC_V_4_7_0 is not set # CT_CC_V_linaro_4_6_2012_10 is not set # CT_CC_V_4_6_3 is not set # CT_CC_V_4_6_2 is not set # CT_CC_V_4_6_1 is not set # CT_CC_V_4_6_0 is not set # CT_CC_V_linaro_4_5_2012_03 is not set # CT_CC_V_4_5_3 is not set # CT_CC_V_4_5_2 is not set # CT_CC_V_4_5_1 is not set # CT_CC_V_4_5_0 is not set # CT_CC_V_linaro_4_4_2011_02_0 is not set # CT_CC_V_4_4_7 is not set # CT_CC_V_4_4_6 is not set # CT_CC_V_4_4_5 is not set # CT_CC_V_4_4_4 is not set # CT_CC_V_4_4_3 is not set # CT_CC_V_4_4_2 is not set # CT_CC_V_4_4_1 is not set # CT_CC_V_4_4_0 is not set # CT_CC_V_4_3_6 is not set # CT_CC_V_4_3_5 is not set # CT_CC_V_4_3_4 is not set # CT_CC_V_4_3_3 is not set # CT_CC_V_4_3_2 is not set # CT_CC_V_4_3_1 is not set # CT_CC_V_4_2_4 is not set # CT_CC_V_4_2_2 is not set # CT_CC_CUSTOM is not set CT_CC_GCC_4_2_or_later=y CT_CC_GCC_4_3_or_later=y CT_CC_GCC_4_4_or_later=y CT_CC_GCC_4_5_or_later=y CT_CC_GCC_4_6_or_later=y CT_CC_GCC_4_7=y CT_CC_GCC_4_7_or_later=y CT_CC_GCC_HAS_GRAPHITE=y CT_CC_GCC_HAS_LTO=y CT_CC_GCC_HAS_PKGVERSION_BUGURL=y CT_CC_GCC_HAS_BUILD_ID=y CT_CC_GCC_HAS_LNK_HASH_STYLE=y CT_CC_GCC_USE_GMP_MPFR=y CT_CC_GCC_USE_PPL_CLOOG=y CT_CC_GCC_USE_MPC=y CT_CC_GCC_HAS_LIBQUADMATH=y # CT_CC_LANG_FORTRAN is not set CT_CC_SUPPORT_CXX=y CT_CC_SUPPORT_FORTRAN=y CT_CC_SUPPORT_JAVA=y CT_CC_SUPPORT_ADA=y CT_CC_SUPPORT_OBJC=y CT_CC_SUPPORT_OBJCXX=y # # Additional supported languages: # CT_CC_LANG_CXX=y # CT_CC_LANG_JAVA is not set # CT_CC_LANG_ADA is not set # CT_CC_LANG_OBJC is not set # CT_CC_LANG_OBJCXX is not set CT_CC_LANG_OTHERS="" # # gcc other options # CT_CC_ENABLE_CXX_FLAGS="" CT_CC_CORE_EXTRA_CONFIG_ARRAY="" CT_CC_EXTRA_CONFIG_ARRAY="" CT_CC_STATIC_LIBSTDCXX=y # CT_CC_GCC_SYSTEM_ZLIB is not set # # Optimisation features # CT_CC_GCC_USE_GRAPHITE=y CT_CC_GCC_USE_LTO=y # # Settings for libraries running on target # CT_CC_GCC_ENABLE_TARGET_OPTSPACE=y # CT_CC_GCC_LIBMUDFLAP is not set # CT_CC_GCC_LIBGOMP is not set # CT_CC_GCC_LIBSSP is not set # CT_CC_GCC_LIBQUADMATH is not set # # Misc. obscure options. # CT_CC_CXA_ATEXIT=y # CT_CC_GCC_DISABLE_PCH is not set CT_CC_GCC_SJLJ_EXCEPTIONS=m CT_CC_GCC_LDBL_128=m # CT_CC_GCC_BUILD_ID is not set CT_CC_GCC_LNK_HASH_STYLE_DEFAULT=y # CT_CC_GCC_LNK_HASH_STYLE_SYSV is not set # CT_CC_GCC_LNK_HASH_STYLE_GNU is not set # CT_CC_GCC_LNK_HASH_STYLE_BOTH is not set CT_CC_GCC_LNK_HASH_STYLE="" # # C-library # CT_LIBC="eglibc" CT_LIBC_VERSION="2_13" CT_LIBC_eglibc=y # CT_LIBC_glibc is not set # CT_LIBC_uClibc is not set CT_LIBC_eglibc_AVAILABLE=y # CT_LIBC_EGLIBC_V_2_16 is not set # CT_LIBC_EGLIBC_V_2_15 is not set # CT_LIBC_EGLIBC_V_2_14 is not set CT_LIBC_EGLIBC_V_2_13=y # CT_LIBC_EGLIBC_V_2_12 is not set # CT_LIBC_EGLIBC_V_2_11 is not set # CT_LIBC_EGLIBC_V_2_10 is not set # CT_LIBC_EGLIBC_V_2_9 is not set # CT_LIBC_EGLIBC_V_TRUNK is not set CT_LIBC_EGLIBC_2_13_or_later=y CT_LIBC_EGLIBC_2_12_or_later=y CT_LIBC_EGLIBC_2_11_or_later=y CT_LIBC_EGLIBC_2_10_or_later=y CT_LIBC_EGLIBC_2_9_or_later=y CT_LIBC_EGLIBC_HAS_PKGVERSION_BUGURL=y # # svn is missing. You'll have to either: # # # - have a pre-downloaded local tarball # # # - or have a LAN mirror with a pre-downloaded tarball # # # otherwise you won't be able to download eglibc # # CT_EGLIBC_OPT_SIZE is not set # CT_EGLIBC_CUSTOM_CONFIG is not set CT_LIBC_glibc_AVAILABLE=y CT_LIBC_mingw_AVAILABLE=y CT_LIBC_newlib_AVAILABLE=y CT_LIBC_none_AVAILABLE=y CT_LIBC_uClibc_AVAILABLE=y CT_LIBC_SUPPORT_THREADS_ANY=y CT_LIBC_SUPPORT_NPTL=y CT_LIBC_SUPPORT_LINUXTHREADS=y CT_THREADS="nptl" # # Common C library options # CT_THREADS_NPTL=y # CT_THREADS_LINUXTHREADS is not set CT_LIBC_XLDD=y # # eglibc other options # CT_LIBC_GLIBC_MAY_FORCE_PORTS=y CT_LIBC_glibc_familly=y CT_LIBC_GLIBC_EXTRA_CONFIG_ARRAY="" CT_LIBC_GLIBC_CONFIGPARMS="" CT_LIBC_GLIBC_EXTRA_CFLAGS="" CT_LIBC_EXTRA_CC_ARGS="" # CT_LIBC_ENABLE_FORTIFIED_BUILD is not set # CT_LIBC_DISABLE_VERSIONING is not set CT_LIBC_OLDEST_ABI="" CT_LIBC_GLIBC_FORCE_UNWIND=y CT_LIBC_GLIBC_USE_PORTS=y CT_LIBC_ADDONS_LIST="" # # WARNING !!! # # # For glibc >= 2.8, it can happen that the tarballs # # # for the addons are not available for download. # # # If that happens, bad luck... Try a previous version # # # or try again later... :-( # # CT_LIBC_LOCALES is not set # CT_LIBC_GLIBC_KERNEL_VERSION_NONE is not set CT_LIBC_GLIBC_KERNEL_VERSION_AS_HEADERS=y # CT_LIBC_GLIBC_KERNEL_VERSION_CHOSEN is not set CT_LIBC_GLIBC_MIN_KERNEL="3.6.3" # # Debug facilities # # CT_DEBUG_dmalloc is not set # CT_DEBUG_duma is not set # CT_DEBUG_gdb is not set # CT_DEBUG_ltrace is not set # CT_DEBUG_strace is not set # # Companion libraries # CT_COMPLIBS_NEEDED=y CT_GMP_NEEDED=y CT_MPFR_NEEDED=y CT_PPL_NEEDED=y CT_CLOOG_NEEDED=y CT_MPC_NEEDED=y CT_COMPLIBS=y CT_GMP=y CT_MPFR=y CT_PPL=y CT_CLOOG=y CT_MPC=y CT_GMP_V_5_0_2=y # CT_GMP_V_5_0_1 is not set # CT_GMP_V_4_3_2 is not set # CT_GMP_V_4_3_1 is not set # CT_GMP_V_4_3_0 is not set CT_GMP_VERSION="5.0.2" CT_MPFR_V_3_1_0=y # CT_MPFR_V_3_0_1 is not set # CT_MPFR_V_3_0_0 is not set # CT_MPFR_V_2_4_2 is not set # CT_MPFR_V_2_4_1 is not set # CT_MPFR_V_2_4_0 is not set CT_MPFR_VERSION="3.1.0" CT_PPL_V_0_11_2=y # CT_PPL_V_0_11_1 is not set # CT_PPL_V_0_11 is not set # CT_PPL_V_0_10_2 is not set CT_PPL_VERSION="0.11.2" CT_PPL_0_11=y CT_PPL_NEEDS_LIBPWL=y CT_CLOOG_V_0_15_11=y # CT_CLOOG_V_0_15_10 is not set # CT_CLOOG_V_0_15_9 is not set # CT_CLOOG_V_0_15_8 is not set # CT_CLOOG_V_0_15_7 is not set # CT_CLOOG_V_0_15_6 is not set CT_CLOOG_VERSION="0.15.11" CT_CLOOG_0_15_1x=y CT_CLOOG_NEEDS_AUTORECONF=y CT_MPC_V_0_9=y # CT_MPC_V_0_8_2 is not set # CT_MPC_V_0_8_1 is not set # CT_MPC_V_0_7 is not set CT_MPC_VERSION="0.9" # # Companion libraries common options # # CT_COMPLIBS_CHECK is not set # # Companion tools # # # READ HELP before you say 'Y' below !!! # # CT_COMP_TOOLS is not set # # Test suite # # CT_TEST_SUITE_GCC is not set </code></pre>

Querying!

Guidance

An individual column

Larger individual text columns get their own page to allow for proper reading.

SQuiL has stopped working due to an internal error.

If you are curious you may find further information in the browser console, which is accessible through the devtools (F12).

Reload